Steel Aluminum CNC Machining Milling Turning

If there are multiple cavities on aluminum profile parts, it is not advisable to use the sequential processing method of one cavity for each cavity during processing, as this can easily cause uneven stress on the parts and cause deformation. Using multiple layers of processing, each layer should be processed simultaneously to all cavities as much as possible, and then the next layer should be processed to evenly stress the parts and reduce deformation.

Reduce cutting force and cutting heat by changing the cutting amount; Among the three factors of cutting amount, the back-cutting amount has a significant impact on the cutting force. If the machining allowance is too large and the cutting force of a single pass is too large, it will not only cause deformation of the parts but also affect the rigidity of the machine tool spindle and reduce the durability of the tool. If the amount of back-cutting is reduced, it will greatly reduce production efficiency. However, in CNC machining, high-speed milling can overcome this challenge. While reducing the back feed, as long as the feed is correspondingly increased and the machine speed is increased, the cutting force can be reduced while ensuring machining efficiency.

Longwang

Drawing Format

Reference Samples

Customized Machining

 

VR visit Factory

 

Customer & Feedback